ISPEInternational Pipe Encyclopedia

Pipe Brands

Dunhill Large Billiard Variations (LB and 835 Variants)

The slender-shanked variations that Dunhill's two large billiard shapes, LB and ODA 835, showed over the years, along with collector observations on the stampings of these variants.

Dunhill Large Billiard Variations is a collecting topic gathered around two large billiard shapes in the Dunhill catalogue, LB and ODA 835. The subject is less the shapes themselves than the individual examples that, while carrying the same stamp, deviate from the usual size and proportions. The brand reorganized its shape numbers into a three-digit system in 1975; the half-century before that covers most of these deviations.

The Divide Between the Thick Shank and the Pencil Shank

LB entered the catalogue after the First World War and became the brand's best-known large billiard. The body of the measurement stayed consistent throughout: a thick shank and a full, apple-like bowl. Against this, in the 1920s, mostly on sandblasted Shell surfaces, an entirely different line appears under the same stamp. In these examples the shank is markedly thinned, sometimes down to what could be called a "pencil shank," while the bowl becomes flat-sided and elongated.

Collector records report that these two lines also diverge in the stamping: a 7 was struck beside LB on slender-shanked Shells, while an 8 appeared on Bruyere LBs of the same years; the number here indicates not the shape but the inner tube code. It should be noted that this distinction has not been confirmed by an independent source and rests solely on collector studies. According to the same records, the slender-shanked line ends around 1930, and Shell LBs return to standard proportions.

The technical difference between the surfaces is cited as the reason for this latitude. In the early years of the Shell finish, sandblasting followed the grain, so the initial rough shape could change radically during the process. The material also differed: soft Algerian briar was used for Shell, hard Calabrian briar for Bruyere. Most Shells made for London shops before the war never carried a shape stamp at all — only the inner tube code — while pipes bound for export were stamped early on to simplify ordering. It is also reported that the 482 shape, made briefly in the 1930s, was referred to in company records as a "very large LB," though this is a second-hand account.

The Deviation Repeated in the ODA Era

The Rest of This Entry Is in the App

The full ISPE opens with your IPC account.

Open in the app

Related Entries

Last updated:

Source: Pipedia, adapted under the CC BY-SA licence.